Any suggestions on making a wall mounted desk? - wall mounted shaving mirror
I want to make an office on the wall as the vanity of use. Any tips / tricks / ideas? Ideally, it would be 4 to 5 cm long, 2 cm deep.
Thursday, January 21, 2010
Wall Mounted Shaving Mirror Any Suggestions On Making A Wall Mounted Desk?
3 comments:
everything is in the media (Stud Racehorse)
You want to 4.5 "x 2" (inch may be a little small), you can find existing counters are of this size - then simply add the brackets and (try Home Depot or equivalent and most of the Vanities, only 18 " (1 1 / 2 ft) deep (their kitchen counters are 24 "-25" for comparison - this is too far from the ice) Note the metal brackets below seem a little sticky and fragile that they precut wooden supports many models see, you can even the fact that the endings are ready, and cut out the columns of the porch look great and give the project a professional touch
I have successfully used prefabricated countertop and adjustable metal brackets. The rules of the mounting bracket on the wall with large blocks of long screws (I used toggle bolts in tunnels are not an option) The sale of the length of the arm (18-20), which support a 24 "deep counter. If you go beyond , 24 "or schedule have something real heavy on the counter, could be a workbook with 2 drawers and one end of a room for you at the right height. I also use these units regular cabinet drawers can be purchased in any hardware store.
http://pages.areaguides.com/ubuild/Desk & ...
It is a good idea
Post a Comment